Futaba 3PM-X 2.4GHz - Manual (Page 28)

28
Function Map
Function Map
Power switch turned on
The current modulation mode and
model number are displayed
for about two seconds.
Press "SEL" key to select
the desired function screen.
Press it for one second or
more to scroll to the opposite
direction.
Press "CH" key to select the next
set-up screen.
[ABS, BMX, PMX and 4WS]
Any set-up screen can not be selected
when the function is set to "off" or "inh".
(Initial Screen)
Digital trim DT1 - DT4 display
The current position is displayed on the LCD screen
for about two seconds when each digital trim is operated.
End Point Adjuster Timer
Model Select
Channel Reverse
Subtrim
Channel 3 Position
ATL Function
Steering D/R
Trim
Steering Speed
Steering EXP/Throttle EXP
ABS Function
Throttle Acceleration
Brake mixing
Programmable Mixing
4WS Mixing
Fail Safe Function (HRS system only)