Futaba 3PM-X 2.4GHz - Manual (Page 57)

57
Functions
Initially set functions
DT1: Steering trim
DT2: Throttle trim
DT3: Dual rate function
DT4: ATL function
DT1
DT2
Function Select Lever / FNC-DT
This function allows selection of the function performed by the grip lever (DT3/DT4)
and digital trim (DT1/DT2).
DT3
DT4
Settable functions
ST: Steering trim
TH: Throttle trim
DR: Steering D/R
AT: Throttle ATL
E1: Steering EXP
BK: Brake mixing rate
3C: Channel 3
4W: 4WS rate
OF: (function off)
Function select lever setup
1
(Setup item selection)
Use the (CH) button to select the item to be set.
2
(When changing the function)
Use the (+) or (-) button to select the function.
3
When ending adjustment, turn off the power switch before use.
Calling the setup screen
1. Turn on the power switch
while pressing "SEL" key.
2. Next, use "SEL"
key to select the
desired function
screen.
Press "CH" key to select the next set-
up screen.