Futaba 12Z - Manual (Page 126)

126 <Data>
Operation modes
The operation modes when stick, trim lever, or
knob was selected are described below.
*When the enter button is pushed after the cursor was moved
to the [MODE] and [TYPE] items and the mode was
selected by data input dial, the operation mode is changed.
Linear hysteresis mode
This mode sets ON/OFF at the left or right
(up or down) with the set point as the reference.
Hysteresis (dead band) can be set between ON and
OFF. The ON and OFF positions can be reversed.
８６０：
ﶶﶸﵼﶶ﷈﷈ ﶴﶶﷂﶸﶬ ﶮﶦﷂﶬ﷎ﷄﶞ ＠ｄ
﷒ﶼﶬ﷊ﶰﶸ﷒ﶬ﷊
ﶺﶶ﷌﷊
ﶬﶢﶴ﷊ ＜Ｂ８ＪＲ０
Ｄ＂．，Ｊ０
８６０：
ﶶﶸ
ﷄﶢﶮ
ﶶ﷈﷈
ﴀﴜﳾ ﳌ ﴈﴊ
ﴚﴔﴂﴀﳾﳞ
ﶶ﷈﷈
ﶶﶸ
ﳒﴶﳜ
ﳖﴶﳜ
４８，﻾６８
Linear box mode
This mode turns on the switch within a range of
SRLQWV(DFKSRLQWFDQEHVHW7KH21DQG2))
positions can be reversed.
８６０：
ﶶﶸﵼﶶ﷈﷈ ﶴﶶﷂﶸﶬ ﶮﶦﷂﶬ﷎ﷄﶞ ＠ｄ
﷒ﶼﶬ﷊ﶰﶸ﷒ﶬ﷊
ﶺﶶ﷌﷊
ﶬﶢﶴ﷊ ＜Ｂ８ＪＲ０
Ｐ６＄
８６０： ４８，﻾６８
ﶶﶸ
ﷄﶢﶮ
ﶶ﷈﷈
ﴀﴜﳾ ﳌ ﴈﴊ
ﴚﴔﴂﴀﳾﳞ
ﶶﶸ
ﶶ﷈﷈
ﳒﴶﳜ
ﳖﴶﳜ
Symmetrical hysteresis mode
Operation is the same as the linear hysteresis
mode, but left and right (up and down) operations
are symmetrical about the neutral position. For
instance, when you want to switch DR1 with the
aileron stick, when the stick is moved to the left or
right, DR1 can be turned on at the same left and
right position.
８６０：
ﶶﶸﵼﶶ﷈﷈ ﶴﶶﷂﶸﶬ ﶮﶦﷂﶬ﷎ﷄﶞ ＠ｄ
﷒ﶼﶬ﷊ﶰﶸ﷒ﶬ﷊
ﶺﶶ﷌﷊
ﶬﶢﶴ﷊ ．＂：：Ｊ，
Ｄ＂．，Ｊ０
８６０： ４８，﻾６８
ﶶﶸ
ﷄﶢﶮ
ﶶ﷈﷈
ﴀﴜﳾ ﳌ ﴈﴊ
ﴚﴔﴂﴀﳾﳞ
ﶶ﷈﷈
ﶶﶸ
ﳖﴰﴨﳜ
ﳖﴮﴸﳜ
Shifting the ON/Off point
The ON/OFF and hysteresis (dead band)
boundary point can be shifted. ON/OFF at a
free position and the hysteresis width can be
changed.
８６０：
ﶶﶸﵼﶶ﷈﷈ ﶴﶶﷂﶸﶬ ﶮﶦﷂﶬ﷎ﷄﶞ ＠ｄ
﷒ﶼﶬ﷊ﶰﶸ﷒ﶬ﷊
ﶺﶶ﷌﷊
ﶬﶢﶴ﷊ ＜Ｂ８ＪＲ０
Ｄ＂．，Ｊ０
８６０：
ﶶﶸ
ﷄﶢﶮ
ﶶ﷈﷈
ﴀﴜﳾ ﳌ ﴈﴊ
ﴚﴔﴂﴀﳾﳞ
ﶶ﷈﷈
ﶶﶸ
ﳒﴶﳜ
ﳖﴶﳜ
４８，﻾６８
ŏ%ODFNUDQJH 21UDQJH
ŏ*UH\UDQJH +\VWHUHVLV GHDGEDQG UDQJH
ŏ:KLWHUDQJH 2))UDQJH
[Setting method]
1. First, use the cursor lever to move the
cursor (reverse-video) to the [PNT:] item.
:KHQWKHGDWDLQSXWGLDOLVWXUQHGWRWKH
left, the ON side point can be set and
when the data input dial is turned to the
right, the OFF side point can be set.
3. Move the stick, trim lever, or knob to the
point you want to change and push the
enter button. The point is shifted.
A hysteresis range can be created by
the ON side and OFF side point setting
described above.
Symmetrical box mode
2SHUDWLRQLVWKHVDPHDVWKHOLQHDUER[PRGH
but left and right (up and down) operation is
symmetrical about the neutral position.
８６０：
ﶶﶸﵼﶶ﷈﷈ ﶴﶶﷂﶸﶬ ﶮﶦﷂﶬ﷎ﷄﶞ ＠ｄ
﷒ﶼﶬ﷊ﶰﶸ﷒ﶬ﷊
ﶺﶶ﷌﷊
ﶬﶢﶴ﷊ ．＂：：Ｊ，
Ｐ６＄
８６０： ４８，﻾６８
ﶶﶸ
ﷄﶢﶮ
ﶶ﷈﷈
ﴀﴜﳾ ﳌ ﴈﴊ
ﴚﴔﴂﴀﳾﳞ
ﶶﶸ
ﶶ﷈﷈
ﳖﴰﴨﳜ
ﳖﴮﴸﳜ