Interlogix TruVision 360° Configuration Manual - Manual (Page 10)

8 TruVision 360° Camera Configuration Manual
Parameters Description
1. Live View Parameters
Protocol Specifies the network protocol used.
Options include: TCP, UDP, MULTICAST and HTTP.
TCP: Ensures complete delivery of streaming data and better
video quality, yet the real-time transmission will be affected.
UDP: Provides real-time audio and video streams.
HTTP: Allows the same quality as of TCP without setting
specific ports for streaming under some network environments.
MULTICAST: It’s recommended to select MCAST type when
using the Multicast function.
Live View Performance Specifies the transmission speed.
Options include: Real Time, Balanced or Fluency.
Rules Enable this option to detect real-time alarm such as motion
detection. The area which detected the alarm will be
highlighted as green.
Image Format Specifies the snapshot format as JPEG or BMP.
2. Record File Settings
Record File Size Specifies the maximum file size.
Options include: 256 MB, 512 MB, and 1G.
Save Record Files to Specifies the directory for recorded files.
Save Downloaded Files to Specifies the directory for downloaded files.
3. Picture and Clip Settings
Save Snapshots In Live
View To
Specifies the directory for saving snapshots in live view mode.
Save Snapshots When Playback
To Specifies the directory for saving snapshots in playback mode.
Save Clips To Specifies the directory for saving video clips in playback mode.
Configuration
Use the Configuration panel to configure the camera system, network, video audio,
alarms, users, transactions and other parameters such as upgrading the firmware. See
Figure 3 on page 9 for descriptions of the configuration folders available.