Interlogix TruVision 360° Configuration Manual - Manual (Page 13)

TruVision 360° Camera Configuration Manual 11
Figure 4: RS-485 Settings window
To set up RS-485 settings:
1. Click Configuration > System > RS485 .
2. Select the RS-485 port parameters.
Note: The Baud Rate, PTZ Protocol, and PTZ Address parameters should be
exactly the same as the PTZ camera parameters.
3. Click Save to save changes.
Defining 360° settings
The 360° Settings configuration enables you to select the real-time mode, and the
mounting type, etc.