Interlogix TruVision 360° Configuration Manual - Manual (Page 49)

TruVision 360° Camera Configuration Manual 47
Index
8
802.1X setup, 15
A
Alarm types
motion detection, 24
Archived files
playing back, 41
Archiving files
recorded files, 41
set up default directories, 7, 8
snapshots of recorded files, 41
Audio parameters, 17
B
Brightness setup, 20
C
Camera image
configuring, 19
Camera name
display, 22
Contrast setup, 20
D
Date format set up, 22
DDNS setup, 15
Default settings
restore, 37
Display information on-screen
set up, 22
E
Email setup, 17
Events
searching logs, 42
F
Firmware upgrade, 38
FTP setup, 16
H
Hard drive
capacity, 29
card full, 29
formatting, 29
I
IP address
finding IP address of camera, 5
L
Language
changing, 39
Live view mode
starting, 39
Logging on and off, 39
Logs
information type, 43
search logs, 42
viewing logs, 42
M
Motion detection
configuring, 24
marking the detection areas, 25, 27, 28
N
NAT setup, 17
Network protocol
setup, 7, 8
Network settings
overview of local camera parameters, 7, 8
NTP synchronization, 9
P
Passwords
modifying, 35
Playback
play back recorded files, 41
screen, 40
searching recorded video, 40
Ports setup, 14
Post-recording times, 30
PPPoE setup, 15
Pre-recording times, 30
PTZ control, 44
Q
QoS setup, 16
R
Reboot camera, 38
Recording
defining recoding schedule, 30
manual recording, 39
playback, 40