Interlogix TruVision 360° Configuration Manual - Manual (Page 40)

38 TruVision 360° Camera Configuration Manual
Importing/exporting a configuration file
To import/export a configuration file:
1. Click Configuration > System > Maintenance .
2. Click Browse to select the local configuration file and then click Import to start
importing configuration file.
3. Click Export and set the saving path to save the configuration file.
Upgrading the firmware
The camera firmware is stored in the flash memory. Use the upgrade function to write
the firmware file into the flash memory.
You need to upgrade firmware when it has become outdated. When you upgrade the
firmware, all existing settings are unchanged. Only the new features are added with
their default settings.
To upgrade the firmware through the web browser:
1. Download on to your computer the latest firmware from our web site at:
www.interlogix.com/video/product/
- Or -
www.utcfssecurityproductspages.eu/videoupgrades/
2. Click Configuration > System > Maintenance .
3. Click the Browse button to locate the latest file on your computer.
4. Click Update . You will receive a prompt asking you to reboot the camera.
Rebooting the camera
The camera can be easily rebooted remotely.
To reboot the camera through the web browser:
1. Click Configuration > System > Maintenance .
2. Click Browse to select the local configuration file and then click Import to start
importing.
3. Click the Reboot button to reboot the device.
4. Click OK in the pop-up message box to confirm reboot operation.