Interlogix TruVision 360° Configuration Manual - Manual (Page 41)

TruVision 360° Camera Configuration Manual 39
Camera operation
This chapter describes how to use the camera once it is installed and configured.
Logging on and off
You can easily log out of the camera browser window by clicking the Logout button on
the menu toolbar. You will be asked each time to enter your user name and password
when logging in.
On the upper left corner of the logon window, you can select the language of the
Browser. It supports English, Chinese, Spanish, German, Russian, French, and
Portuguese.
Figure 21: Login dialog box
Note: If the default admin password (1234) is not changed, there will pop-up a
message reminding you to do so.
Live view mode
Once logged in, click “Live View” on the menu toolbar to access live view mode. See
Figure 1 on page 6 for the description of the interface.
You can stop and start live view by clicking the Start/stop live view button on the
bottom of the window.
Record
You can record live video and stored it in the directory you have configured. In the live
view window, click the
Record button at the bottom of the window. To stop recording,
click the button again.
Taking a snapshot
You can take a snapshot of a scene when in live view. Simply click the Capture button
located at the bottom of the window to save an image. The image is in JPEG format.
Snapshots are saved on the hard drive.