Interlogix TruVision 360° Configuration Manual - Manual (Page 28)

26 TruVision 360° Camera Configuration Manual
Notify Alarm Recipient Send an exception or alarm signal to remote management
software when an event occurs.
Send Email Sends an email to a specified address when there is a
motion detection alarm.
Upload Snapshot Capture the image when an alarm is triggered and upload
the picture to NAS or FTP server.
Trigger Channel Triggers the recording to start in the camera.
10. Click Save to save changes.
Tamper-proof alarms
You can configure the camera to trigger an alarm when the lens is covered and to take
an alarm response action.
Figure 12: Tamper-proof menu
To set up tamper-proof alarms:
1. Click Configuration > Events > Tamper-proof .
2. Check the Enable Tamper-proof box.
3. Move the Sensitivity slider to set the sensitivity of the detection.
4. Click Edit to edit the arming schedule for tamper-proof alarms. The arming schedule
configuration is the same as that for motion detection. See “To set up motion
detection” for more information.
5. Check the checkbox to select the linkage method taken for the tamper-proof.
6. Click Save to save changes.