Chaparral K5312/K7313 - Manual (Page 102)

G- and K-Series User’s Guide
7-22
3
Select Battery and press Enter.
The Battery screen displays. The current setting is marked with an * next to it
4
Select the option you want and press Enter.
Changing the Utility Priority
You can change the priority at which all utilities (Verify, Reconstruct, Expand,
Initialize, etc.) run when there are active I/O operations competing for the controller’s
CPU. The choices are:
!
High (default)
!
Medium
!
Low
For example, select High if your highest priority is to get the array back to a fully
fault-tolerant state. This causes heavy I/O with the host to be slower than normal.
Select Low priority if streaming data without interruption, such as for a Web server, is
more important than data redundancy. This allows the reconstruct or other utility to
run at a slower rate with minimal effects on host I/O.