Chaparral K5312/K7313 - Manual (Page 111)

Managing Disk Drives and Enclosures
8-3
To display all drives:
1
From the System Menu, select Display Drives and press Enter.
The Display Drives screen displays.
2
Press Esc to return to the System Menu.
Viewing Drive Status
You view the status of the drives in an array, including the following information:
!
Drive number—This drive’s sequential position in the controller’s drive list
!
Drive status—Whether the drive is up or down
!
Channel number—Back-end disk bus number
!
Target ID
!
Size—Size of the drive in MB
!
Status—If a member of an array, this displays the array name and member
number. If a spare, this displays the type of spare. If unused, displays Available.
If drive was part of an array that no longer exists, displays Leftover.
Note: If a drive has failed or malfunctioned, it may not be listed.