Chaparral K5312/K7313 - Manual (Page 57)

Creating and Managing Arrays
4-23
Caution: The trust array feature can cause unstable operation and data loss
if used improperly. This feature is intended for disaster recovery.
To trust an array:
1
From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu displays.
2
Selection Option Configuration and press Enter.
The Option Configuration Menu displays.
3
Select Enable Trust Array and press Enter.
The Enable Trust Array screen displays.
4
Select Enable and press Enter.
The option is only enabled until you use it. After you trust an array, the option
reverts back to being disabled.
5
Press Esc twice to return to the System Menu.
6
Select Array Menu and press Enter.
The Select Array screen displays with a list of existing arrays.
7
Select the array you want and press Enter.
The Array Menu screen displays.
8
Select Trust Array and press Enter.
The system confirms that you want to trust the array.
9
Select Yes and press Enter.
The array will be back online.
Note: If the array does not come back online, it may be that too many
members are offline or the array may have additional failures on the bus or
enclosure that Trust Array cannot fix.
!