Chaparral K5312/K7313 - Manual (Page 76)

G- and K-Series User’s Guide
6-4
To enable dynamic spares:
1
From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu screen displays.
2
Select Option Configuration and press Enter.
The Option Configuration screen displays.
3
Select Dynamic Spare Configuration and press Enter.
The Dynamic Spare Config screen displays. The current setting is marked with
an * next to it.
4
Select Enabled and press Enter.
The Rescan Rate screen displays.
5
Enter the rescan rate in minutes.
This tells the controller how often it should look for an available drive by
rescanning the bus. Remember that rescanning the bus frequently can affect
performance. If you have a SEP, the dynamic spare configuration will not
rescan the bus. The SEP will detect the new drive and tell the controller to
rescan and the rescan rate you set here will not affect the system.
The system confirms the change.
6
Select Yes and press Enter.