Chaparral K5312/K7313 - Manual (Page 108)

G- and K-Series User’s Guide
7-28
8
Using your terminal emulator software, send the .fla file using KERMIT.
If you are using HyperTerminal, select Transfer | Send File, navigate to where
the firmware update file is located, select it, and click Open. Select the same
Protocol from the drop-down list as you selected from the Flash Utility screen.
Click Send.
The file transfers. The system displays messages showing that it is flashing the
code and rebooting the controller.
Caution: Do not interrupt the power when transferring the new firmware.
❒
!