Chaparral K5312/K7313 - Manual (Page 64)

G- and K-Series User’s Guide
5-6
Controller
LUN SOFT, NONE, or
specific number as
set in the Disk
Array
Administrator
software.
Topology
(G7313 and
K7313 only) Always Loop.*
Node WWN
(G7313 and
K7313 only) FC World Wide
Name for node.
Port WWN
(G7313 and
K7313 only) FC World Wide
Name for port.
FC Addr
(G7313 and
K7313 only) 24-bit FC address
or None if the FC
link is not active. AL_PA
(G7313 and
K7313 only) Currently
assigned value
or None if the
FC link is not
active.
Loop ID
(G7313 and
K7313 only) SOFT or a specific
number as set in
the Disk Array
Administrator
software. Current Currently
assigned value
or Inactive if the
FC link is not
active.
CHAN 0 Initiator ID SCSI ID of
controller on
Channel 0 as set in
the Disk Array
Administrator
software. Ultra/U2 Hardware runs
as Ultra2.
Table 5-1. Configuration information (Continued)
Group Field What displays Field What displays