Chaparral K5312/K7313 - Manual (Page 96)

G- and K-Series User’s Guide
7-16
3
Select LUN Zoning and press Enter.
The LUN Exclude List or LUN Include List screen displays. The default setting
for each array LUN is Include All Hosts. This results in all servers (hosts) being
able to access all arrays. You can change the list type using the Change Zone
Type option. See the next step.
4
Select the option you want and press Enter.
– Display Host List—Displays a list of the servers (hosts) currently on the
include or exclude list for the selected array. This option only displays
servers if you have already used Add Host to List and added one or more
WWNs to an include or exclude list.
– Add Host to List—Displays the Enter Host WWN screen where you enter
the WWN or name (alias) or select the server you want to add to the current
list for the selected array. Enter the WWN or name (alias) or select the server
from the list and press Enter.
– Remove Host from List—Displays the Remove Host from List screen
which contains a list of the servers (hosts) currently on the include or
exclude list for the selected array. Select the WWN of the server you want to
remove from the list and press Enter.
– Change Zone Type—Displays the Change Zone type screen where you can
change the type of zoning to one of four options described below. Changing
the zone type does not add or remove any hosts in previously created lists.