Chaparral K5312/K7313 - Manual (Page 117)

Managing Disk Drives and Enclosures
8-9
3
Select SMART and press Enter.
The SMART screen displays. The current setting is marked with an * next to it.
4
Select the option you want and press Enter.
5
Reboot or rescan to have your changes take effect.
See Rebooting the Controller on page 7-1 or Rescanning All Channels on
page 7-23.
Blinking a Drive LED
You can blink the LED on a specific drive. The drive continues blinking its LED until
you do one of the following:
!
Press Esc before the Disk Array Administrator times out
!
Repeat the blink LED command, which toggles the blink LED command off
To blink a drive:
1
From the System Menu, select Utilities Menu and press Enter.
The Utilities Menu screen displays.
2
Select Drive Utilities Menu and press Enter.
The Drive Utilities Menu screen displays.