Chaparral K5312/K7313 - Manual (Page 104)

G- and K-Series User’s Guide
7-24
To rescan all channels:
1
From the System Menu, select Utilities Menu and press Enter.
The Utilities Menu screen displays.
2
Select Rescan and press Enter.
Pausing I/O
Some drive enclosures allow you to remove and replace drives while SCSI bus
activity continues; others do not. Refer to your enclosure documentation.
Caution: Pausing I/O halts active I/O to the host.
Note: If you are not sure that your enclosure supports hot swapping, use the
Hot Swap Pause option before you remove or replace any drives in an array
to ensure data integrity.
Hot Swap Pause suspends activity on all device channels used in the controller,
thereby assuring data integrity on the connected drives and arrays.
!