Deleting an array, Deleting an array 4-24 – Chaparral K5312/K7313 User Manual
Page 58
G- and K-Series User’s Guide
4-24
Deleting an Array
You can delete an array when you no longer need the array or you need the drives for
another use.
Caution:
Deleting an array deletes the data contained in the array;
however, before reusing the drives, you should do a low-level format on
each drive.
Note:
You cannot delete an array while any utility (Initialize, Verify,
Expand, or Reconstruct) is running on the array. You must stop the utility, if
allowed, or let it finish before you can delete the array.
To delete an array:
1
From the System Menu, select Delete an Array and press Enter.
A list of arrays appears in the menu, if more than one array is exists.
2
Select the array you want to delete and press Enter.
The system asks you to confirm the deletion.
3
Select Yes and press Enter.
❒
!