Chaparral K5312/K7313 - Manual (Page 94)

G- and K-Series User’s Guide
7-14
Creating Names (Aliases) for Server WWNs
You can give the servers on your SAN names (aliases) that you can easily recognize
to make LUN zoning easier to manage. For example, you can use the computer name
that has already been assigned to each server.
You can determine which WWN is for which server by booting one server at a time
and then viewing the WWN list. The most recently booted server is first on the list.
You can name up to 63 servers. The names are stored on the controller, so if you
change controllers, you have to rename the servers.
To create or change names for WWNs:
1
From the System Menu, select Configuration Menu and press Enter.
The Configuration Menu screen displays.
2
Select Manage Host Names and press Enter.
The Manage Host Names screen displays.
3
Select Add or Name Host and press Enter.
The Add or Name Host screen displays all known WWNs and host names that
you have set up. If you want to change the name (alias), enter the new name in
Step 5. For more information see Viewing Known WWNs on page 7-12.
If the controller is not aware of any WWNs, the list is empty. Select Enter New
Host to enter a WWN.
Name set up
previously