Keri Systems HPP-100 - Manual (Page 19)

HPP-100 Hand-Held Programmer
Revision 3.3 13
Press . . . [L]
ENROLL CARD[S]
LEVEL: _
Press . . . [2] (the time zone for all cards in
the batch to follow)
[SEND] [CLEAR]
LEVEL: 2
Press . . . [SEND]
PRESENT CARD[S]
ENROLLING 0 0 1 0
Present each card to the Master Reader one at time. With each correct entry, the reader
will respond with a two short BEEPs signifying the card was accepted. If a slot is occupied
or the card is already enrolled, the response will be a “NO-BEEP.”
Void a Card [G]
Voiding a Card removes it from the Master Control Unit’s list of occupied slots. To void a
card you must know the card’s slot number. You do not have to have the card in hand to
void it from the Master Control Unit.
Example . . . to void the card in slot 47:
Press . . . [VOID]
VOID CARD[S]
#: _ _ _ _ TO #: _ _ _ _
Press . . . [0] [0] [4] [7] (the slot number)
VOID CARD[S]
#: 0 0 4 7 TO #: _ _ _ _
Press . . . [SEND]