Keri Systems HPP-100 - Manual (Page 4)

HPP-100 Hand-Held Programmer
Revision 3.3 v
Level Commands 25
Serial Port Function 25
Configure the Serial Port [N] 25
Manual Card Enrolling Function 26
Enroll Card by the Number Code [G] 26
Security Functions 27
Reset Anti-Passback for All Cards [G] 27
Set the Card Security Fence [N] 28
Set Daylight Savings Time [G] 28
Favorite Reader List Functions 29
Display the Favorite Reader List [G] 29
Add a Reader to the Favorite Reader List [G] 29
Add Readers to the Favorite Reader List [G] 30
Remove a Reader from the Favorite Reader List [G] 31
Remove Readers from the Favorite Reader List [G] 31
Transfer a Card from the Master Reader to all Readers on the FRL [G] 32
Transfer Cards from the Master Reader to all Readers on the FRL [G] 33
Master Control Commands 34
Change a PIN [G] 34
Clear Reader Memory [N] 35
APPENDICES 36
Glossary 38
HPP-100 Hand-Held Programmer Quick Start Guide 39
Customer Support Information 41
Warranty Information 42
Figures
FIGURE 1 – HPP-100 ORIENTATION 1
FIGURE 2 - THE SERIAL PRINTER CABLE 7
FIGURE 3 - THE PC CABLE 7
FIGURE 4 - THE MODEM CABLE 7