Keri Systems HPP-100 - Manual (Page 37)

HPP-100 Hand-Held Programmer
Revision 3.3 31
Remove a Reader from the Favorite Reader List [G]
Removing a Reader from the Favorite Reader List is used to remove one reader from the
favorite reader list. To perform this command, you must know the address number of the
reader you wish to remove.
Example . . . to remove reader 2 from the favorite reader list:
(readers 1 and 2 are already on
the favorite reader list)
Press . . . [LVL] [VOID]
VOID DOOR[S]
DOOR: _ TO DOOR: _
Press . . . [2] [SEND]
Displaying the favorite reader list will now show:
1 2 3 4 5 6
+ – – – – –
Remove Readers from the Favorite Reader List [G]
The Remove Readers from the Favorite Reader List command is used to remove several
consecutive readers from the favorite reader list. To perform this command, you must
know the address number of the reader you wish to remove.
Example . . . to remove readers 4 through 6 from the favorite reader list:
(readers 1, 2, and 4 through 6
are already on the favorite
reader list)
Press . . . [LVL] [VOID]
VOID DOOR[S]
DOOR: _ TO DOOR: _
Press . . . [4] [ZIP] [6] [SEND]