Toa N-8000 Series - Manual (Page 31)

1-14
Chapter 1 GENERAL DESCRIPTION
[N-8000DI Direct Select Unit]
Having 32 contacts each for control input and output, the N-8000DI performs the following interface functions.
• Interface to control an indicator or external equipment such as a CCTV's switcher using relay contacts.
• Interface function that enables Direct Select, Calling Station Display and Remote Dialing functions for
designated Master Stations using contact input and output.
• Interface function that uses contact output to diagnose system line and network statuses and transmits
the diagnosed result.
The N-8000DI also features Network interface for connection with IP stations, IP intercom exchanges, and
various kinds of interface units.
The N-8000DI is a rack-mounted model (1U size), but can be used for desktop and wall-mount applications as
well.
[N-8000CO C/O Interface Unit]
This unit has one analog outside line circuit and connects to the outside line to enable the following functions:
• Direct In Line — Calls the designated Master Station from the analog outside line.
• Direct Inward Dialing — Calls the Master Station from the analog outside line by designating that station
through dialing.
• Outside Line Call Transfer — Transfers calls to the analog outside line when the called Master Station
is not available or does not respond.
• Outside Line Paging — Makes paging calls from the analog outside line.
• Outside Line Equipment Control — Controls external equipment connected to the N-8000MI or
N-8000DI from the analog outside line.
The N-8000CO also features Network interface for connection with IP stations, IP intercom exchanges, and
various kinds of interface units.
The N-8000CO is a rack-mounted model (1U size and half-size width), but can be used for desktop and wall-
mount applications as well.
[N-8000AL Telephone Interface Unit]
The N-8000AL unit has one outside line connection circuit and connects to analog telephones to enable the
following functions:
• Master Station — Permits the connected analog telephone to be used in the same manner as the
Master Station.
The N-8000AL also features Network interface for connection with IP stations, IP intercom exchanges, and
various kinds of interface units.
The N-8000AL is a rack-mounted model (1U size and half-size width), but can be used for desktop and wall-
mount applications as well.
[SX-200IP IP Interface Module]
The SX-200IP is a module to enable broadcasts from the N-8000 system to the SX-2000 system. Incorporated
in the SX-2100AI Audio input unit of the SX-2000 system, the SX-200IP allows broadcasts from the N-8600MS
Multifunctional master station or N-8610RM IP Remote microphone station to be made to each zone of the SX-
2000 system.
5.2.4. Others
[40-Station Terminal Board E-7000TB]
The E-7000TB is a clip type terminal board for connecting station lines to each exchange. Up to 40 lines
(twisted pair cables) can be connected. The optional YC-105 clipping tool is required for wiring. The E-7000TB
is rack-mountable (3U size).
[Equipment Racks CR-273 and CR-413]
The Exchange, 40-station terminal board, and other equipment components are mounted in these racks.