Toa N-8000 Series User Manual
Page 374
Advertising
3-70
Chapter 3
INSTALLATION & WIRING
N-8000DI Direct select unit
Contact output signals
Contact output signals
Contact output signals
Contact output signals
To network
RJ-45 connector
16P removable terminal plug
(supplied with the N-8000DI)
3
3
3
3
4
3. Contact output terminal connection
Contact output terminals have no polarity.
(Refer to
, Terminal plug connection.)
[Specification of relay contact output]
Withstand voltage: 24 V DC
Control current: 2 mA – 500 mA
4. Network connection
Can be connected to a network of 10BASE-
T/100BASE-TX in auto-sensing.
Use a straight through cable of UTP category 5 or
more for this connection.
Advertising