Toa N-8000 Series - Manual (Page 50)

1-33
Chapter 1 GENERAL DESCRIPTION
11. Push-to-talk key [PTT]
Pressing this key while calling a party by means
of a continuous call tone permits a voice call to
be made. (Refer to p. 2-9 .) Also, pressing this
key during a hands-free conversation establishes
a one-way conversation from the party who
pressed the key. (Refer to p. 2-7 .)
12. Dial keys
Use these keys to make a call or set a function.
13. Clear key [C]
Terminates the conversation.
14. Arrow keys [ ][ ][ ][ ]
Use these keys to perform auto-dial registration
(refer to p. 2-11 ) or system settings (refer to
Chapter 7 ).
15. Paging key [CALL]
Makes a paging. (Refer to p. 2-25 .)
16. Paging response key [RESP.]
Responds to a paging.
(Refer to p. 2-31 .)
17. Hold key [HOLD]
Places the conversation on hold.
(Refer to p. 2-14 .)
18. Transfer key [TRANSFER]
Used to transfer the current conversation to
another station. (Refer to p. 2-15 .)
LAN
21 20 19 23
24 25 26 27
22
19. AC adapter terminal [DC INPuT]
Connect the AC adapter* to this terminal.
*
Use the AD-1210P/1215P (optional) or its
equivalent.
20. External speaker terminal [EXT.SP.]
An external speaker (8 Ω, 0.6 W) can be connected
to this terminal. (Refer to p. 3-75 .)
Shift the Speaker selector switch (29) located
on the bottom surface of the unit to the EXT.SP
position when using the external speaker.
21. Headset terminal [HEADSET]
Connects to a headset. Connection of the headset
disables the speaker.
22. Network connection terminal [LAN]
Can be connected to a network of 10BASE-
T/100BASE-TX in auto-sensing.
Connecting the station to a PoE (Power over
Ethernet) switching hub eliminates the need for
an AC adapter.
(Ethernet RJ-45 jack)
23. PC connection terminal [PC]
A PC can be cascaded with the station.
(Not compatible with PoE function)
(Ethernet RJ-45 jack)
24. ACT indicator (green)
Lights while transmitting or receiving data.
25. FD indicator (yellow)
Lights when the network is in full duplex
communications.
26. ACT indicator (green)
Lights while the connected PC is transmitting or
receiving data.
27. FD indicator (yellow)
Lights when a PC is connected.
[Rear]