VACUUBRAND MZ 2C NT VARIO without controller (o.C.) - Manual (Page 47)

page 47 of 76
Vacuum distribution:
The VACUU•LAN ® modules allow process-ori-
ented, flexible and cost effective connections
according to your requirements. One vacuum
pump can support several workstations. Con-
tact VACUUBRAND for details.
For additional accessories such as vacuum valves, small-flange compo-
nents, vacuum gauges or vacuum controllers refer to www.vacuubrand.com.
VCL 01
VCL-B 10
VCL 02
VCL-B 11
VACUU•LAN ® manual flow control module VCL 01 ..................................677106
VACUU•LAN ® shut off / manual flow control module VCL 02 677107
VACUU•LAN ® automatic control module VCL-B 10 ..................................677208
VACUU•LAN ® manual flow control/
automatic control module VCL-B 11 ..........................................................677209
On this page we offer only a small selection of VACUU•LAN ® options. Please contact VACUUBRAND for further
information. Listed modules are designed for surface-mounted installation. Different catalog numbers are used for
modules designed for flush-mounting with concealed tubing.
Catchpot 500 ml, coated (PC 300x VARIO) .................................................638497
O-ring 28 x 2.5 ..............................................................................................635628
at the spherical ground joint of the catchpot at the inlet (PC 300x VARIO)
Exhaust waste vapor condenser (PC 301x VARIO) ..................................699975
Collecting flask 1000ml (PC 301x VARIO) ..................................................638877
Catchpot (at inlet) (PC 301x VARIO) ............................................................699980
Spare parts:
➨
A service manual with exploded view drawings, spare parts list and
directions for repair is available on request.
+
The service manual is intended for trained service people only.