Viconics VT7200 Installation Manual (Current Release 5000 Series PIR Ready) - Manual (Page 18)

18 | PIR Ready VT7200 Series-Installation Guide
PAN ID
Personal Area Network
Identification
Default value = 0
Range is: 0 to 500
Conditional parameter to Wireless models
VT7200X5x00W
This parameter will only appear when a wireless
network adapter is present. If the Terminal Equipment
Controller is installed as a stand-alone (Network
Ready) unit or with a
BACnet™ or Echelon™ adapter,
this parameter will not be used or displayed.
This parameter (Personal Area Network Identification)
is used to link specific Terminal Equipment
Controllers to a single specific Viconics wireless
gateway ( VWG ). For every Terminal Equipment
Controller reporting to a gateway ( maximum of 30
Terminal Equipment Controllers per gateway ), be
sure you set the SAME PAN ID value both on the
gateway and the Terminal Equipment Controller(s).
The default value of 0 is NOT a valid PAN ID.
The valid range of available PAN ID is from 1 to 500.
Range 1 to 250 for centralized networked applications
using a VWG or a Jace with the wireless stat driver
Range 251 to 500 is for stand-alone (Network Ready)
applications where no VWG or Jace with the wireless
stat driver is used.
Channel
Channel selection
Default value = 10
Range is: 10 to 26 Conditional parameter to Wireless models
VT7200X5x00W
This parameter will only appear when a wireless
network adapter is present. If the Terminal Equipment
Controller is installed as a stand-alone (Network
Ready) unit or with a
BACnet™ or Echelon™ adapter,
this parameter will not be used or displayed.
This parameter (Channel) is used to link specific
Terminal Equipment Controllers to specific Viconics
wireless gateway(s) (VWG). For every Terminal
Equipment Controller reporting to a gateway
(maximum of 30 Terminal Equipment Controllers per
gateway ), be sure you set the SAME channel value
both on the gateway and the Terminal Equipment
Controller(s).
Viconics recommends using only the usage of
channels 15 and 25 only.
The default value of 10 is NOT a valid channel. The
valid range of available channel is from 11 to 26