Compaq SW3324 - Manual (Page 17)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-7
Compaq SW3322/SW3323/SW3324 Dual-Speed Switch User Guide
Writer: Fran Spragens Project: Overview Comments: 355307-002
File Name:3324_1.doc Last Saved On:3/16/99 11:31 AM
The port LEDs are grouped to the left of their corresponding RJ-45 ports. Table
1-2 defines the performance of the port LEDs for the 10Base-T/100Base-TX
ports in the default configuration.
Table 1-2
Port LEDs Defined
Name Function
Gigabit Ethernet Ports L LED On: Indicates a valid connection (link) on the associated port.
L LED Off: Indicates no link on the associated port.
A LED flashing: Indicates the presence of transmit and/or receive activity.
A LED Off: Indicates the absence of transmit or receive activity.
RJ-45 Ports
Default Configuration L LED On: Indicates a valid connection (link) on the associated port.
L LED Off: Indicates no link on the associated port.
A LED flashing: Indicates the presence of transmit and/or receive activity.
A LED Off: Indicates the absence of transmit or receive activity.
RJ-45 LED mode
button pressed L LED On: Port is in the full duplex mode.
L LED Off: Port is in the half duplex mode.
A LED On: Indicates the port is in the 100Base-TX mode.
A LED Off: Indicates the port is in the 10Base-T mode.
Fiber Ports (SW3323) with
fiber card pre-installed Link LED On: Indicates a valid connection (link) on the associated port.
Link LED Off: Indicates no link on the associated port.
Activity LED flashing: Indicates the presence of transmit and/or receive activity.
Activity LED Off: Indicates the absence of transmit or receive activity.