Compaq SW3324 - Manual (Page 36)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-9
Compaq SW3322/SW3323/SW3324 Dual-Speed Switch User Guide
Writer: Fran Spragens Project: Installation Comments:
File Name:3324_2.doc Last Saved On:3/16/99 11:34 AM
After these two tests are performed, the operational software of the switch is
loaded. A series of more extensive diagnostic tests are then conducted during
which the Test LED remains lit. The results of the tests are displayed on the
terminal. If all tests pass, the Test LED turns off. When all tests are complete,
the system is functional and the user interface is ready to receive commands at
the console.
RJ-45 Connector
The 10Base-T/100Base-TX ports use RJ-45 connectors. Figure 2-6 shows an
RJ-45 connector being inserted into a port.
Figure 2-6 Inserting an RJ-45 Connector into a Port