Compaq SW3324 - Manual (Page 49)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-11
Compaq SW3322/SW3323/SW3324 Dual-Speed Switch User Guide
Writer: Fran Spragens Project: User Interface Comments:
File Name:3324_3.doc Last Saved On:3/16/99 3:05 PM
Forwarding Table Configuration Menu Descriptions continued
Field Description
Last Page Displays the last page of the forwarding table.
Display Table Redisplays the forwarding table.
Make Entry Static Makes a dynamic entry in the forwarding table static.
Add Static Entry Adds a static entry to the forwarding table.
Delete Static Entry Deletes a static entry from the forwarding table.
Modify Static Entry Modifies a static entry from the forwarding table.
Search by Port # Performs a search by port number and posts the search results at the top
of the screen.
Search by MAC Address Performs a search by MAC Address and posts the search results at the top
of the screen.
Port ID Displays unique identification number of the port.
Spanning Tree Configuration Menu
The Spanning Tree Configuration Menu allows you to view and modify
Spanning Tree parameters. Select b from the Switch Configuration Menu to
view the Spanning Tree Configuration Menu. A letter identifies selections that
can be modified. All other fields are read-only. Figure 3-8 shows the Spanning
Tree Configuration Menu.
Figure 3-8 Spanning Tree Configuration Menu
SPANNING TREE CONFIGURATION Access Control: READ/WRITE
Bridge ID 32768-000000000000
Designated Root
Root Path Cost 0
Root Port NO PORT
Topology Change Count 0
a. Spanning Tree Protocol Enable No
b. Port Configuration Menu
c. Hello Time (seconds) 2
d. Forward Delay (seconds) 15
e. Max Age (seconds) 20
f. Bridge Priority 32768
x. Previous Menu
Enter Selection: