Compaq SW3324 - Manual (Page 31)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-4 Installation
Writer: Fran Spragens Project: Installation Comments:
File Name:3324_2.doc Last Saved On:3/16/99 11:34 AM
1. Mount one of the ears to the switch using two (2) of the supplied screws.
Repeat this step for the other side of the switch.
2. Slide the switch into the rack and align the holes in the rack mounting
ears with the holes in the rack rails.
3. Insert and tighten appropriate rack-mounting screws (not provided).
! WARNING: To reduce the risk of personal injury or damage to the
equipment, be sure each rack is level and stable. Rack frames should be
coupled together or otherwise secured to the building structure to maintain
stability. This must be accomplished before performing any work on the rack.
Figure 2-1 Mounting the Switch in a Rack