Compaq SW3324 - Manual (Page 44)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-6 User Interface
Writer: Fran Spragens Project: User Interface Comments:
File Name:3324_3.doc Last Saved On:3/16/99 3:05 PM
System Configuration Menu
The System Configuration Menu enables modification of system-level switch
configuration parameters. Select a from the Main Menu to view the System
Configuration Menu. Figure 3-4 shows the System Configuration Menu and
Table 3-3 describes the menu.
Figure 3-4 System Configuration Menu
Table 3-3
System Configuration Menu Descriptions
Selection Description
SNMP Configuration Menu Menu for configuring a number of SNMP-related parameters.
System Name The administrative name given to the switch (1-36 character range).
System Location The physical location of the switch (1-36 character range).
System Contact The contact person for the operation of the switch (1-36 character range).
IP Address The IP address of the switch.
Subnet Mask The subnet mask associated with the IP address of the switch.
Default Gateway The default gateway (or router) that the switch sends IP packets destined for a
different subnet.
BootP/DHCP Enable Allows you to enable (Yes) or disable (No) the BootP and DHCP protocols for
automatically configuring the switch’s IP address information.
continued
SYSTEM CONFIGURATION Access Control:READ/WRITE
a. SNMP Configuration Menu
b. System Name
c. System Location
d. System Contact
e. IP Address000.000.000.000
f. Subnet Mask000.000.000.000
g. Default Gateway000.000.000.000
h. BootP/DHCP EnableYes
i. Screen Timeout(minutes)5
j. PasswordNone
k. Terminal Baud Rate9600
l. Terminal Hardware Flow Control No
m. Power Up Diagnostics Yes
x. Previous Menu
Enter Selection: