Compaq SW3324 - Manual (Page 58)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-20 User Interface
Writer: Fran Spragens Project: User Interface Comments:
File Name:3324_3.doc Last Saved On:3/16/99 3:05 PM
Port Priority Menu
The Port Priority Menu allows you to modify and display a table that shows priority
queuing configuration information on a per port basis. Select c from the Class of
Service Configuration Menu to view the Port Priority Configuration Menu. Figure
3-16 shows the Port Priority Configuration Menu and Table 3-15 describes the menu.
Figure 3-16 Port Priority Configuration Menu
Table 3-15
Port Priority Configuration Menu Descriptions
Field Description
Port ID The port number assigned to the port.
Port Name The administrative name assigned to the port.
Priority Default The priority level assigned to non-tagged frames entering the associated port. The
configurable range is 0-7 (0=low, 7=high). This value, combined with the Priority
Threshold Value, determines the priority level assigned to all non-tagged frames.
Next Page Displays the next page of the table.
Previous Page Displays the previous page of the table.
First Page Displays the first page of the table.
Last Page Displays the last page of the table.
Configure Allows you to configure the priority default for a specific port (0-7 number range).
PORT PRIORITY Access Control:
READ/WRITE
PORT ID PORT NAME PRIORITY DEFAULT
------------------------------------------------------
--------
1 0
2 0
3 0
4 0
5 0
6 0
7 0
8 0
9 0
10 0
n. Next Page p. Previous Page f. First Page l.
Last Page
c. Configure x. Previous Menu
Enter Selection: