Rfc 1213 (mib-ii) – Compaq SW3324 User Manual

Page 87

Advertising
background image

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .



'SQTEU7;7;7;(YEP7TIIH7[MXGL9WIV+YMHI

;VMXIV*VER7TVEKIRW4VSNIGX72141EREKIQIRX'SQQIRXW

*MPI2EQICHSG0EWX7EZIH3R%1

The SW3322/SW3323/SW3324 switch supports four standard MIBs:

RFC 1213 - Management Information Base for Network Management of
TCP/IP based Internets (MIBII)

RFC 1398 - Definitions of Managed Objects for the Ethernet-like
Interface Types (Ethernet MIB)

RFC 1493 - Definitions of Managed Objects for Bridges

RFC 1757 - Remote Network Monitoring Management Information
Base

The switch also supports Compaq proprietary MIB extensions.

6*' 1-&--

RFC 1213 provides management of switch system-level parameters, including
TCP/IP protocol-related statistics, IP addressing, routing table information, and
interface statistics for each switch port. MIB-II is the standard MIB defined by
RFC 1213. All agent devices operating SNMP are required to support at least
part of MIB-II.

This MIB reports information about the protocols and network interfaces
supported on the agent itself, as well as other general information. The MIB is
divided into a number of groups, each of which corresponds to a specific
protocol or set of information. Some groups are defined in other RFC
documents.

Advertising