Rfc 1398 (ethernet mib), Rfc 1493 (bridge mib), 6*' )xlivrix1 – Compaq SW3324 User Manual

Page 88: 6*' &vmhki1

Advertising
background image

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .



72141EREKIQIRX

;VMXIV*VER7TVEKIRW4VSNIGX72141EREKIQIRX'SQQIRXW

*MPI2EQICHSG0EWX7EZIH3R%1

The groups specifically defined in RFC 1213 and supported by the switch
system software are as follows:

System – General information about the agent system

Interfaces – Information about the network interfaces of the system

Address Translation – Interface address information, both MAC level
and network (IP) level

IP – Statistics and information related to the IP protocol

ICMP – Statistics and information related to the ICMP protocol

TCP – Statistics and information related to the TCP protocol

UDP – Statistics and information related to the UDP protocol

Transmission – Statistics and information related to the physical
network medium to which the system interfaces (e.g. Ethernet, token
ring, etc.).

SNMP – Statistics and information related to the SNMP protocol

6*' )XLIVRIX1-&

RFC 1398 provides management and monitoring for the Ethernet-specific
aspects of each port on the switch. This is the Ethernet-specific statistics
subgroup of the MIB-II Transmission group. This group provides a set of
statistics related to Ethernet’s physical level operation. Specifically, error and
collision-related statistics are presented.

6*' &VMHKI1-&

RFC 1493 is a group defined under MIB-II. This MIB deals with the operation
of the system as an 802.1D-compliant bridge. Areas of functionality supported
by this group include Spanning Tree and forwarding table information and
configuration.

Advertising