Sears 16 - Manual (Page 36)

____________________ \ ____________________________________
fext/Phrasa/Format ?
▼
STORE 1
(1^
1
<72
T ▼
STORE
g) H
RETURN
O MARGIN/TAB SET <72
▼ ▼
STORE RETURN
sot margin/tab )
o
<72
“ ▼ ▼
STORE RETURN
ontor text )
ooe N
\)
aOSING FILE Y/N?
T T
STORE RETURN
3 il)
Ì7Z
V
NP
3) "Text/Phrase/Format?” appears on the LCD. .‘T’, “P” and
"F” will flash.
4)
5)
6)
7)
8 )
9)
Press the "T” (TEXT) Key.
The paper is fed one line and the Carrier returns to the
left margin. The LCD is cleared and the counter indicating
the number of spaces to the right margin appears. The
Automatic return is automatically activated.
Margin and tab settings, as well as other functions which
were in effect before entering the STORE mode, are
automatically canceled to be stored in the back-up mem­
ory. They are automatically recalled when you exit the
STORE mode.
Hold down the Code Key and press the “F” Key. “O
MARGIN/TAB SET” appears.
Set the left and right margins and tabs, as you would in
the NP mode. Clear any unnecessary tabs.
Hold down the Code Key and press the "F” Key again.
"O MARGIN/TAB SET" disappears. The Carrier returns to
the newly set left margin.
Enter text» Entered text is displayed on the LCD and
printed one line at a time when you type a normal hyphen
or space in the automatic carrier return zone.
Make corrections on the LCD before the line is printed.
Once text is printed on paper, it cannot be corrected. To
make corrections after text has been printed, first close
the file and edit it on the LCD, as described in section 3,
"File Editing”.
Press the Mode Key to terminate the STORE mode.
"CLOSING FILE Y/N?” appears on the LCD.
10) Press the "Y" Key to close the file and return to the Nor­
mal Print (NP) mode.
• Press the "N” Key to return to the Text storing mode.
31