File editing – Sears 16 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. FILE EDITING
This function ailows you to edit stored files’on the LCD.
1. Activating Edit Mode
1
)
2)
3)
Press the Mode Key until a appears on the LCD
above “STORE”. "NAME OF FILE?” is displayed.
Type the file name to be edited (maximum of five letters/
numbers). Then press the Return Key.
You can terminate the Edit mode by pressing the Mode
Key (and the “Y” Key to close the file) at any time.
The beginning of the file appears on the LCD. Move the
cursor to any position in the file and edit it. Make correc
tions as explained in "Correotions on LCD”.
In the Edit mode, when more than 40 characters are
entered, they appear on the LCD in 2 lines.
In order to check which features are engaged, depressing
the Code Key will change the LCD to one line and the
“T” marks will appear to show the mode and feature set
tings. When the Code Key is released, the indication on
the LCD returns to 2 lines.
/When you specify a format file, "FORMAT FILE” appears.
Move the Carrier to any position and set the new margins/
tabs as you would in any other mode.
2. Function Symbols
When stored text is displayed on the LCD, the typewriter
functions are represented by the symbols shown at left.
36