Moving cursor, Going to the beginning or end of a file – Sears 16 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3.
Moving Cursor
1)
Press the Backspace Key to move the cursor one space
to the left.
2)
Press the Express Key to move the cursor one space to
the right.
• Hold down either key for continuous movement.
I
reu
l/^\J
4.
Going to the Beginning or End of a File
1)
Press the Relocation Key to go to the end of the file.
2)
Hold down the Code Key and press the Relocation Key
to go to the beginning of the file.
5.
Moving Cursor to Desired Position (Using the
Search Function)
1)
Hold down the Code Key and press the Express Key.
"S=” appears on the LCD.
2)
type the characters you want to find (maximum of 18
characters).
3)
Press the Return Key. The typewriter searches for the text
that you4iave typed from its present position (regardiess
of any underlining of text.)
4)
Once found, the cursor appears at the position after the
last letter of that text. If the text that you have typed is
not in the file, the cursor returns to its previous position
before function activation.
•
• The desired text will be memorized by the typewriter until
power is turned off, and appears every time you activate
the Search function. It is useful to find any other occur
rences of the same text.
37