Removing ribbon cassette, Installing ribbon cassette, How to change ribbon cassette – Sears 16 User Manual
Page 66
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1.
Removing Ribbon Cassette
HOW TO CHANGE RIBBON CASSETTE
1
)
2
)
2
.
1
)
2
)
3)
Turn off the machine and open the Top Cover.
Hold down the Ribbon Cassette Stand with your thumbs
and gently remove the Cassette by pulling upward on the
Cassette Arms as shown.
Look through the window in the Cassette to check on
how much ribbon remains, if you see colored tape In the
window, replace the Ribbon Cassette with a new one.
Installing Ribbon Cassette
Before installing a new Ribbon Cassette, always take up
any slack in the ribbon by winding the Ribbon Takeup
Knob counterclockwise, and remove tab on Cassette Rib
bon.
When installing a new ribbon, wind past the colored por
tion at the beginning.
Fit the two projections at the back of the Ribbon Cassette
into the two slots in the Ribbon Cassette Stand.
Carefully lower the front of the cassette so that the ribbon
fits betv^en the Card Holder and Printwheel. Press the
portions marked "A” in the illustration until the Ribbon
Cassette snaps into place.
4)
Turn the Ribbon Takeup Knob counterclockwise until it
locks into place 0. Then, turn it clockwise until it stops
5)
Close the Top Cover.