Sears 16 - Manual (Page 49)

2. Block Move
display text ^
EX.
C
position cursor
first chorocter
---------------- ^—
market. Ije planning to introduce sever
al new sets with different combination.
EX.
Q - ©
market. We planning to introduce sever
_________ ▼ ▼ ____ ___________ _
STOHB niXlCK
c
move cursor to
target position 3
EX.
icoocx ^
Improvements. »*4 We are planning to
STORB
EX.
Improvements. W We are planning to
Introduce several new sets with dlfferen
This function moves a block of text to a specified location
in the file.
1) Display the file text using the edit mode.
2) Position the cursor on the first character of the text to be
moved.
3) Hold down the Code Key and press the "P” Key. This
marks the beginning of the block. Two beeps sound and
a “T” appears above “BLOCK" on the display, indicating
that the block function is in effect.
4) Move the cursor to the last character of the text to be
moved.
5) Hold down the Code Key and press the “P” key again to
mark the end of the block. Two beeps sound, indicating
that the block of text has been defined. The defined block
of text starts flashing on the display.
6) Move the cursor to the position where you want to move
thè block of text.
7) Hold down the Code Key and press the "M” Key. The
block of text is moved to the specified position. “T”
above "BLOCK” disappears. The block function is can­
celed at this time.
® When a block of text is moved, succeeding characters are
shifted to the left to fill in the space created by the moving
of text.
44