Recalling a phrase file, Recalling a format file – Sears 16 User Manual
Page 99
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2.
Recalling a PHRASE File
1)
Hold down the Code Key and press the “6” Key. "NAME
OF FILE?" appears on the LCD. Type the file name and
press the Return Key.
® “NOT FOUND PRESS <-!” appears on the LOD if you
have entered a file name that is not stored in the memory.
Press the Return Key and retype the file name.
2)
A appears on the LCD above “RECALL”, and the
Carrier will start printing from its present position, accord
ing to the margins which are currently set.
®
To
temporarily
stop
printout,
press
the
Return
Key.
“PAUSE PRESS <-i" appears on the LCD. Restart printing
by pressing the Return Key again.
® You can cancel the Recall function at any time after start
ing a printout by pressing the Space Bar. “END OF FILE
RECALL” appears on the LCD when recall has been can
celed.
3.
Recalling a FORMAT File
1)
Hold down the Code Key and press the "6” Key. “NAME
OF FILE?" appears on the LCD. Type the file name and
press th^ Return Key.
® “NOT FOUND PRESS <-l” appears on the LCD if you
have eqtered a file name that is not stored in the memory.
Press the Return Key and retype the file name.
2)
A appears on the LCD above “RECALL”. While “RE
CALLING FORMAT” appears on the LCD, the margin/tab
format set on the typewriter will be automatically changed
to the recalled one, and then "END OF FILE RECALL”
appears on the LCD.
The printing stops at any stop code in the file and “STOP
CODE”, “DEC. TAB STOP” or “AUTO CENTER STOP"
appears on the LCD. Enter desired text and restart print
out by holding down the Code Key and pressing the “6"
Key. (Refer to “Stop Code”.)
40