Cabletron Systems SmartSwitch Router 9032578-02 - Manual (Page 141)

SmartSwitch Router User Reference Manual 141
Chapter 7: Routing Policy Configuration Guide
5. Create a RIP export source.
6. Create a Static export source.
7. Create a Direct export source.
8. Create the Export-Policy for redistributing all interface, RIP and static routes into
OSPF.
9. Create a RIP export destination.
10. Create OSPF export source.
11. Create OSPF-ASE export source.
ip-router policy export destination ripExpDst source ripExpSrc
network all
ip-router policy create static-export-source statExpSrc
ip-router policy create direct-export-source directExpSrc
ip-router policy export destination ospfExpDstType1 source
directExpSrc network all
ip-router policy export destination ospfExpDstType2 source
statExpSrc network all
ip-router policy export destination ospfExpDstType2t100 source
ripExpSrc network all
ip-router policy create rip-export-destination ripExpDst
ip-router policy create ospf-export-source ospfExpSrc type OSPF
ip-router policy create ospf-export-source ospfAseExpSrc
type OSPF-ASE