Cabletron Systems SmartSwitch Router 9032578-02 - Manual (Page 31)

SmartSwitch Router User Reference Manual 31
Chapter 1: SmartSwitch Router Product Overview
Configure SNMP Services
The SSR accepts SNMP sets and gets from an SNMP manager. You can configure SSR
SNMP parameters including community strings and trap server target addresses.
To configure the SSR SNMP community string, enter the following command in
Configure mode:
To configure the SNMP trap server target address, enter the following command in
Configure mode:
Configure DNS
The SSR allows you to configure up to three Domain Name Service (DNS) servers.
To configure the DNS, the following command in Configure mode.
Monitoring Configuration
The SSR provides many commands for displaying configuration information. After you
add configuration items and commit them to the active configuration, you can display
them using the following commands.
Configure the SNMP community string. snmp set community <community-name>
privilege read|read-write
Configure the SNMP trap server
target address. snmp set target <IP-addr> community
<community-name> [status
enable|disable]
Configure DNS. system set dns server <IPaddr> [, <IPaddr> [, <IPaddr> ]]
domain <name>
Task Command
Display history buffer. cli show history
Show terminal settings. cli show terminal
Show all accesses to the SNMP agent. snmp show access
Show all SNMP information. snmp show all
Show chassis ID. snmp show chassis-id