Cabletron Systems SmartSwitch Router 9032578-02 - Manual (Page 57)

SmartSwitch Router User Reference Manual 57
Chapter 4: RIP Configuration Guide
Configuration Example
Show detailed information of response
packets sent by the router. rip trace response send
Show detailed information of request
packets sent by the router. rip trace send request
Show RIP timer information. rip show timers
! Example configuration
!
! Create interface ssr1-if1 with ip address 1.1.1.1/16 on port et.1.1 on SSR-1
interface create ip ssr1-if1 address-netmask 1.1.1.1/16 port et.1.1
!
! Configure rip on SSR-1
rip add interface ssr1-if1
rip set interface ssr1-if1 version 2
rip start
!
!
! Set authentication method to md5
rip set interface ssr1-if1 authentication-method md5
!
! Change default metric-in
rip set interface ssr1-if1 metric-in 2
!
! Change default metric-out
rip set interface ssr1-if1 metric-out 3
Interface 1.1.1.1 Interface 3.2.1.1
SSR 1 SSR 2