Cabletron Systems SmartSwitch Router 9032578-02 - Manual (Page 82)

Chapter 6: BGP Configuration Guide
82 SmartSwitch Router User Reference Manual
Note that for running IBGP using group-type Routing you must run an IGP such as OSPF
to resolve the next hops that come with external routes. You could also use protocol any so
that all protocols are eligible to resolve the BGP forwarding address.
Figure 3 shows a sample BGP configuration that uses the Routing group type.
Figure 3. Sample IBGP Configuration (Routing Group Type)
SSR6
SSR1
Cisco
SSR4
lo0 172.23.1.25/30
10.12.1.6/30
10.12.1.5/30
172.23.1.10/30
172.23.1.9/30 172.23.1.6/30
lo0 172.23.1.26/30
172.23.1.5/30
10.12.1.2/30
10.12.1.1/30
AS-64801
IBGP
OSPF