Sekonic L-358 - Manual (Page 32)

-28-
6. Advanced Functions
MODE
7. Wireless flash radio triggering function
With the radio transmitter module plugged into the meters radio compartment and a receiver
(PocketWizard
® products) connected to one or more electronic flash units, the meter provides a
convenient system that enables one person working alone to measure flash output without the need
of a sync cord. Pressing the measuring button simultaneously triggers the flash and measures the
light.
The L-358 has 32 triggering channels with the RT-32N radio transmitter module (optional). Channels
1-16 provide single triggering, while channels 17-32 offer selective quad-triggering capability. Selecting
one of channels (17-32) provides control of up to four additional Quad-triggering zones (A, B, C and
D). Selecting or deselecting of zone lighting is possible with Quad-triggering zone. In order to trigger
flash units set for Quad-triggering zone, the electronic flash unit must be connected to the
PocketWizard MultiMax. With the PocketWizard Plus or Plus II triggering channels 1-4 can be selected.
< Example with PocketWizard 32 channels transceiver >
1. Open battery compartment cover !6, remove
connector cover @2 and set the RT-32N radio
transmitter module (optional) by aligning the
connector with the pins.
2. Switch to the Wireless flash radio triggering setting
mode by using Jog wheel t while pressing mode
set button !0.
CAUTION
• To prevent damage due to static electricity, release static electricity stored in your body
by touching a metal object nearby (door knob, aluminum window frame, etc.) before
touching the radio transmitter module.
RT-32N
radio transmitter
module
3. The set channel number will blink at this time.
Turn the Jog wheel to set the channel setting.