Sekonic L-358 - Manual (Page 7)

q Measuring Mode Icons
Ambient (see page 11)
Auto-Reset Cordless Flash (see page 17)
Cord Flash (see page 15)
Wireless flash radio triggering mode (see page 30)
w ISO Display
Displays ISO film setting
Displays second ISO film setting when ISO 2 button is depressed
e Flash Analyzing indicator
0 % to 100% in 10% increments (percentage of flash in the total exposure)
r +/- Compensation Indicator
Appears when +/- Compensation is set
t Digital aperture value, Aperture Priority, EV Brightness Difference, Average function, EV display
Appears when in Aperture Priority (f/stop) mode (see page 12)
Appears when using brightness difference function (See Page 25)
Appears when using Averaging function (see page 24)
Appears when using EV mode (see page 13)
y Analog Scale
Displays marks at apertures or shutter speed indicating full or half step values for measurement,
memory, average values
Appears when below display range
Blinks when under exposed below measurement range
Appears when above display range
Blinks when over exposed above measurement range
u Shutter priority indicator, shutter speed display for still photography or frames per second (f/s) for
cinematography
Appears when in Shutter Priority (T) mode (see page 11)
Appears when shutter speed is in minutes
Appears when shutter speed is in full seconds
Appears when cine speed is set in frames per second (see page 14)
i Battery Power Indicator (see page 4)
o Memory / Multiple Flash Indicator Display
Appears when in Multi (cumulative) flash measurement mode and shows the cumulated
number (see page 19)
Appears when reading is memorized and shows the number in memory (see page 23)
2. Explanation of the Liquid Crystal Display
-3-