CNET CNWR-811P - Manual (Page 10)

7
Chapter 2 Chapter 2 Chapter 2 Chapter 2
Installation Installation Installation Installation
This Chapter covers the physical installation of the CNWR-811P.
Requirements
• Ethernet LAN (10/100BaseTX) and the TCP/IP protocol.
• For Internet Access, an ADSL or Cable modem, and an Internet Access account with an
ISP.
• To use the Wireless Access Point, all Wireless devices must be compliant with the
IEEE802.11b specifications.
¼ ¼ ¼ ¼ The CNWR-811P's PCMCIA slot is designed to
use ONLY 3.3V PCMCIA Wireless cards.
Procedure
Figure 4: Installation Diagram
1. Choose an Installation Site
Select a suitable physical location. Ensure the CNWR-811P and the ADSL/Cable modem
are powered OFF.
2. Insert Wireless PCMCIA card
Ensuring the Wireless PCMCIA card is the right way up, insert it into the slot on the rear.
Push it firmly until it clicks into position.
2