CNET CNWR-811P - Manual (Page 23)

CNWR-811P User Guide
20
WAN Status
Clicking WAN Status on the menu bar will take you to the WAN Status screen. The screen
shown will depend on whether you are using a Direct Connection or PPPoE.
WAN Status – Direct Connection
Figure 11: WAN Status – Direct Connection
Data
WAN Status
Physical Address The "Hardware" address of this device, as seen by other devices on the
WAN.
IP Address The IP Address of this device, as seen by devices on the WAN.
(This device has 2 IP Addresses; one for the local LAN, and another
for the WAN port.)
Network Mask The Network Mask for the above IP Address.
Default Gateway IP address of the Router/Gateway on the WAN port.
DHCP Client Displays "Enabled" or "Disabled", indicating whether this device is
acting as a DHCP client on the external LAN or WAN.
Buttons
Reconnect Use this button if the connection seems to have been lost, and no data is
being transferred. (This button has no effect unless acting as a DHCP
Client.)
Refresh Update the data on screen.